Dual Way Bidirectional Brushed ESC 2S-3S Lipo 5A ESC Speed Control for RC Model Boat Tank 130 180 Brushed Motor Spare Parts

Product Description :

Specification:Power supply: 2s / 3s battery(can not use 4s)Output current: 5A x 2(above 5A will burn out the ESC)Description: – Recommended motors: 130, 180 brush motors(not in package).
– The ESC can be go forward and backward.
– Dual mode switch switching: It can adjust the differential turn of the two motors, or control the forward and reverse of 2 motors separately.
– In the mixed control mode, can make a double-motor differential turn boat, tucker, tracked vehicle, etc.
Features:【There is a power-on prompt 】You will hear a beep from the motor, prompting you to power on Start at the centre position.
Throttle channel 1 is 1500, you will hear the motor beep, and the ESC will start【Out of control protection】If the signal is lost, the throttle needs to be returned to the center and unlocked again for safety and motor protection.
【The signal is abnormal】PPM1 signal is greater than 2.
1MS or less than 0.
9MS, abnormal signal is equivalent to signal loss.
【Over current protection】130 degree overheat protection, and hardware over current protection 【Power-off protection】Power supply voltage is lower than 4V, ESC restart protection.
This ESC has three modes, choose it before before power on(toggle switch)Mixed control (differential speed) control mode by toggling switch inwardThe two outputs are controlled by two PPM signals to achieve differential speed control, and a differential remote control is required.
Two-way synchronous control mode (switch inward)The output power of the two channels is the same (only connected to PPM1, not connected to PPM2), and also forward and reverse.
Two independent control modes (switch extension)MC1 is consistent with PPM1, and MC2 is consistent with PPM2Please Note: It can not use 4s battery， and above 5A will burn out the ESC

Product Details :