Brushless Motor DC 12V 15V 1.1A Turbine Fan Built in Drive Sweeper Brushless Motor High speed Dust Suction Fan

Specification:
 

Note: The DC brushless motor is equipped with a drive board. It is strictly forbidden to connect the positive and negative poles of the power supply. The red line is connected to the positive pole and the black line is connected to the negative pole. If the connection is wrong, the drive board will burn out.

New stock brushless motor high-speed turbo centrifugal fan, motor work materials are very good, double ball bearings, high-speed brushless motor, fan blade drive balance correction, originally is sweeping robot dust suction fan, this fan impeller is generally used with the shell, the middle round hole is the air inlet, the air outlet is the impeller outer ring 360 degrees spread out, and the turbine centrifugal fan, the measured maximum speed is 13000 revolutions, the maximum power is 16W.

The nominal voltage of the fan is 15V1.1A, the test voltage supports operation between 7-15V, the current is about 0.45 A- 1A, and the rotating speed is 7000-13000 rpm. The voltage determines the power and rotating speed of the fan, and the specific use needs to be tested by itself.

The power supply needs to be equipped with its own regulated DC power supply. The general current of the power supply needs to be about 1.5-2A. It is strictly prohibited to use overvoltage. Connect the red positive pole and the black negative pole. Be sure to confirm that the positive and negative poles are energized again. Wrong connection will burn the internal drive circuit.

The fan weighs about 72 grams.
 

======================================

Package List:

Motor x 1PCS

Built-in double ball bearings

The fan blade and rotor are integrated; drive the balance drilling correction

Built-in driver board; high-power independent MOS driver