Principle Of Ems Micro Current Pulse

The principle of EMS fitness is to transmit micro current signals to the human body through EMS equipment. The frequency of the micro current signals is in the range of 40HZ to 2500HZ (belonging to medium and low frequency, which can only affect the muscle layer). The human body recognizes these current signals as bioelectric signals of the human body, stimulating muscle contraction. This technology has been widely used in the fitness industry, achieving massage, fat reduction, and weight loss based on different frequencies.

The biggest advantages of EMS are high efficiency, short time, and low frequency. Suitable for more people who love fitness, need to lose weight, shape and reduce fat, want to increase muscle mass, and have no time to exercise. EMS provides users with a weightless fitness method, which can avoid joint damage caused by traditional fitness methods or muscle damage caused by incorrect exercise habits or lack of professional guidance. According to a survey, using high-quality massage patches for 20 minutes of EMS training is equivalent to 120 minutes of exercise in the gym, while inferior massage patches cannot perform massage exercises well and thus achieve the effect of fitness and weight loss.

Product Properties

Product Name (H18): Intelligent Fitness Instrument

Size (approximately): 80 * 60 * 30mm

Main machine weight (about): 30g/piece

Host material: ABS

Working temperature: 10-35 ℃

Working voltage: 1.5V  AAA 2EA

Working time: 15 minutes/time

Working current (peak): 30mA

Mode (strength): 6 modes (10 levels of strength per mode)

Operation Steps

1. Disassemble the massage patch packaging bag and install the host on the massage patch.

Remove the transparent protective film from the massage patch.

3. Apply the massage patch that has been installed on the host to the body part that needs to be massaged.

4. Startup and operation (in shutdown state): Press the "ON/INC" key for the first time to start the machine, and the red light will be on; Press the "ON/INC" key for the second time to start the operation, and the red light flashes; Continue to press the "ON/INC" key to increase strength.

5. Change mode: After starting the machine, press the "PROGRAM" key to select the mode, and then press "ON/INC" to start the operation. You can also change the mode during operation.

6. Shutdown: Continue to press the "OFF/DEC" key to reduce the strength until the red light goes out.

7. After turning off the machine, remove the massage patch and cover it with a transparent protective film. Install it neatly and place it in a cool place.

Reminder

1. In order to protect the service life of hydrogel, please keep your skin clean and dry before using this product.

2. It is recommended to use it for 12-15 minutes per exercise, 2-3 times per day. Prolonged use may cause fatigue or discomfort.

3. During use, slight redness of the skin is normal.

4. Do not exercise within half an hour after eating, as it may cause abdominal discomfort.

Product maintenance (cleaning)

1. Mainframe maintenance: Wipe the main unit with a soft cloth. Do not wet the main unit. Do not wipe the main unit with an excessively wet cloth to prevent water from seeping into the main unit. Do not use diluents, gasoline, or other volatile liquids.

2. Massage patch maintenance: The dirt on the patch can be wiped with a damp cloth, or carefully washed with clean water and immediately dried before reuse.

Special hydrogel for massage paste

In order to enhance the sense of experience and achieve the effect of exercise and fitness, please use a special hydrogel with a thickness of at least 1mm. The ordinary hydrogel paste is generally 0.8mm thick, with poor experience effect and strong tingling. Hydrogel stickers are consumables. Please purchase and replace new ones in the following cases:

1. More than 5 days after opening

2. The number of uses (tear off after bonding with the skin) reaches about 25-30 times. 3 The viscosity of the hydrogel drops, and the surface is dry, sunken, damaged, and dirty.

Note: When the hydrogel is not used, it needs to be placed in a shady place.