Specifications | |
---|---|
Compatible With | Raspberry Pi/Jetson Nano/STM32/for Ardruino |
Accessory Type | LCD Screen |
Brand Name | SHCHV |
Origin | Mainland China |
Resolution | 250×122 |
Color | Optional (Black & White) or (Red & Black & White) |
Size | 2.13 Inch |
Interface | SPI |
Outline dimension | 65mm x 30.2mm |
Dot pitch | 0.194 x 0.194 |
Grey level | 2 |
Full refresh time | 2s |
Refresh power | 26.4mW(typ.) |
Viewing angle | >170° |
Standby power | <0.017mW |
Display size | 23.71mm x 48.55mm |
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments…
Features At A Glance
-
No backlight, keeps displaying last content for a long time even when power down
-
Ultra low power consumption, basically power is only required for refreshing
-
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
-
SPI interface, for connecting with other controller boards like Arduino/STM32, etc.
-
Onboard voltage translator, compatible with 3.3V/5V MCUs
-
Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
OPERATING VOLTAGE |
3.3V/5V |
DISPLAY COLOR |
Red/Black/White |
INTERFACE |
3-wire SPI, 4-wire SPI |
GREY SCALE |
2 |
OUTLINE DIMENSIONS |
65 × 30.2mm |
FULL REFRESH TIME |
15s |
DISPLAY SIZE |
48.55 × 23.71mm |
REFRESH POWER |
26.4mW(typ.) |
DOT PITCH |
0.229 × 0.228mm |
STANDBY CURRENT |
<0.01uA (almost none) |
RESOLUTION |
250 × 122pixels |
VIEWING ANGLE |
>170° |
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Compatible With Raspberry Pi Series Boards, Jetson Nano
For Use With Controller Boards Like STM32/Arduino
VCC |
Power (3.3V / 5V input) |
GND |
Ground |
DIN |
SPI MOSI pin |
CLK |
SPI SCK pin |
CS |
SPI chip selection, low active |
DC |
Data/Command selection (high for data, low for command) |
RST |
External reset, low active |
BUSY |
Busy status output pin |
Compatible With 3.3V / 5V MCUs
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags…
Resources & Services
Packing List
1 x 2.13inch e-Paper HAT (Red&Black&White)
1 x RPi screws pack (2pcs)
1 x PH2.0 20cm 8Pin
Reviews
There are no reviews yet.