| Specifications | |
|---|---|
| Quantity | 1 pcs |
| Size | 99mm*99mm*40mm |
| Model Number | Mobula7 1S |
| For Vehicle Type | Airplanes |
| Tool Supplies | Assembled class |
| RC Parts & Accs | AXLE |
| Material | Composite Material |
| Brand Name | XDRC |
| Origin | Mainland China |
| Recommend Age | 14+y |
| Use | Vehicles & Remote Control Toys |
More Information
Happymodel Mobula7 Mobula 7 1S Micro FPV BWhoop Drone 5IN1 AIO Flight Controller Built-in 2.4G ELRS V2.0 RX Nano3 1/3 CMOS
Mobula7 1S/ Mobula7 HD Manual
Were glad to launched our new Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season.
The world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. This is amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.
The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable.
New onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event.
Features:
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx
VTX Power up to 400mw
ELRS V2.0 Support
NEW RS0802 KV20000 motors
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for1S Lipo/LIHV
Recommend 1S 450mah/550mah/650mah battery(Not include)
Specifications:
Brand Name:Happymodel
Item Name:Mobula71S75mmMicro FPVwhoop drone
Wheelbase: 75mm
Size: 99mm*99mm*40mm
Weight: 24g
Receiver option:
2.4G ELRS SPI
SPI Frsky D8/D16
SPI Flysky
PNP (without onboard receiver)
Package includes:
|
Item Name |
Qty |
|
Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame) |
1 |
|
Option1: X12 ELRS V1.0 flight controller built-in SPI ELRS 2.4G receiver |
1 |
|
Option2: X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver |
|
|
Option3: X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver |
|
|
Option4: X12 PNP V1.0 flight controller without onboard receiver |
|
|
RS0802 KV20000 brushless motor |
4 |
|
Gemfan 1610-2 bi-blade propellers(4cw+4ccw) |
1 |
|
Runcam Nano3 1/3 CMOS 800TVL camera |
1 |
|
Onboard 5.8G Openvtx 0mw~400mw VTX |
1 |
|
1S parallel charging board |
1 |
|
Propeller disassemble tool |
1 |
|
Extra camera canopy |
1 |
Spare parts specifications:
|
Motor |
Mode:RS0802 KV20000 |
|
Propellers |
Weight:0.24g Material:PC Pitch:1 inch Props Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm |
|
Flight controller |
X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiverTarget: CRAZYBEEF4SX1280 X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiverTarget: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiverTarget: CRAZYBEEF4FS X12 PNP V1.0 flight controller without onboard receiverTarget: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Built-in Betaflight OSD(SPI Control) Built-in current sensor |
|
Onboard 4in1 ESC |
Power supply:1S LiPo/LiPo HV Current:12A continuous peak15A (3 seconds) Support Bluejay firmware |
|
Onboard SPI ExpressLRS 2.4GHz Receiver |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 Antenna : SMD antenna Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldnt flash separately ExpressLRS firmware |
|
OnboardFrskySPI D8/D16 receiver Version |
SPI BUS receiverFrsky D8compatible Channels: 8ch Failsafe support |
|
OnboardFlyskySPIreceiver Version |
SPI BUS receiver |
|
PNP Version (without onboard receiver) |
Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input |
|
Onboard 5.8g OPENVTX |
Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power:0/RCE/25mw/100mw/400mw Power supply: DC5V Current (5v): <650ma (400mw) |
|
Runcam Nano3 |
Model:RunCam Nano 3 Image Sensor:1/3" CMOS Horizontal Resolution:800TVL Lens:2.1mm(M8) FOV 150 Signal System: NTSC S/N Ratio:>50dB Electronic Shutter Speed:Auto Auto Gain Control (AGC):Auto Min. Illumination:[email protected] D-WDR:Auto Day/Night:Color Power:DC 3-5.5V Current:110mA@5V [email protected] Housing Material:ABS Net Weight:1.2g Dimensions:L14mm*W14mm*H9mm |
|
Lipo Battery (not include) |
Capacity:650mAh Connector:PH2.0 |
Reviews
There are no reviews yet.