Laser Engraving Machine Leather | Laser Engraving Machine Wood – Laser Cutting

Features

Engraving Area:400MM×400MM

Wave Length:445±5nm

Focus:Fixed Focus

Default Focal Length:50mm (from the heat sink to the object)

Control Mode:PWM

Power Rate:S0-S1,000

Engraving Speed:0-15000MM/Min

Baud Rate:115200 – 921600 (Default: 115200)

Computer OS:Win XP, Win 7, Win 8, Win 10 (LaserGRBL)
Mac and Linux (LightBurn)

Control Softwares:LaserGRBL (free), LightBurn (Paid Software)

Input Format:JPG, JPEG, PNG, BMP, SVG, etc.

Available Materials of Engraving:Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc.

Available Materials of Cutting:Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc.

Input Voltage:110V-220V (Compatible)

Power Adapter Output:24V / 2A

Operating Temp:-20℃-50℃

1. The Y rotary is used for laser engraving cylindrical objects of varying diameters.

2. Ortur/Aufero laser rotary roller is compatible with different models of engraving machines.

3. This product is an accessory part of the Ortur/Aufero range of laser engraving machines and not a standalone device. To maintain maximum efficiency, it needs to work in conjunction with an Ortur/Aufero laser engraving machine.

Tips:

1. LU2-2 is better at engraving exquisite patterns, and it has a very small spot which can meet the needs of engraving various complex patterns.

2. LU2-4-LF is good at engraving and better at cutting, and could support a higher speed.

3.LU2-4-SF is good at cutting and better at engraving harder materials (such as stainless steel and other hard materials), and could support a higher speed.

4.LU2-10A optimized cooling system ( Dual Fan Cooling ), Advanced Double Compression Spots Technology,The laser module takes the 3rd beam combining technology with double compression spots. The compressed point is 0.05mm x 0.1mm. which is able to cut 20mm wooden boards and 30mm acrylic sheets. It is almost beyond the effect of 60W CO2 laser.

MUCH BETTER EFFECT:

1. This laser engraver supports PWM mode.

2. Pre-assembled parts, just need 10 – 20 minutes to install the machine.

3. 400 x 400 mm large engraving area.

4. Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance

5. Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

SAFETY PROTECTION SYSTEM:

Flame Detector & Buzzer Alarm: When the laser engraver detects flame, it will automatically stop and beep.

Emergency Stop: There is a switch for emergency stop. Once there is a emergency in the process of engraving, you can press the emergency stop switch to stop engraving.

Active Position Protection: There is a G-sensor on the motherboard. Once the laser engraver detects unauthorized movement, the laser beam will stop.

Laser Beam Safety Guard: If your computer system halted or USB cable disconnected and then the laser engraver stops moving, the laser beam will stop to prevent fire.

Exposure Duration Detection and Limitation: Once the laser cutter is under control but the users forget to operate it, the motor will stopped working. And then the laser beam will stopped after a while to prevent fire.

Power Control System: Once the laser engraver disconnect to the power, it would cut the power to the laser module.

New Eye Protection Design: Adopts newly laser protective cover, the ORTUR laser engraving machine can filter out 98% UV light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles.

UPGRADE MOTHERBOARD:

1. Specialized Motherboard with 32Bits MCU. It could pre-process 32 instructions, support baud rate as high as 921600, which is much more powerful!

2. The Most Advanced 32Bits Laser Engraver Firmware-ORTUR laser master firmware, smarter, faster, higher precision and easier to use.

3. Laser power range could be S0 – S1000, compared to 8Bits desktop laser engravers, which only has S0 – S255, ORTUR Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8Bits high power laser engravers could not do.

ORTUR —— MEETS ALL YOUR NEED

ORTUR listened to our customer's advice and developed the extension kit (Not include in the package) for ORTUR Laser Master 2 PRO S2 series. What are you waiting for? Come and use your imagination to enjoy creation.

ORTUR LASER MASTER 2 PRO S2 IS A HIGHER ACCURACY DIY LASER CUTTER AND ENGRAVER MACHINE

Better technologies make the carving more precise and the carved works perfect. With human-centered design, you can enjoy your creation without being interrupted. This laser engraver's excellent engraving and cutting capabilities can be used to earn handsome money by doing DIY engraving and cutting. Let's start your business for now.