Marine Engine Seawater Filter | Sea Water Filter Boats | Boat Accessories Seaflo – 25mm

1. Always Install the water strainer above the waterline
2. Mount the strainer against a vertical bulkhead
3. Always Install a sea-cock on the water inlet scoop
4. Always use flexible hose for both connections, Water scoop to strainer, Strainer to engine
5.Use only water and/or soap to ease fitting the hoses to the hose connections
6. Never products containing grease or oi
7. Fit each hose connection with stainless steel hose clamps(Sold Separately)
8. Pay attention to the flow direction through the filter

Inspect the strainer element regularly for contaminants
N.B. The lid doesn't need to be removed for inspection . Clean the strainer element if dirt has accumulatedClose the seacock before unscrewing the id of the water strainer , ( see drwg 2 ) Remove the strainer elementout of the housing and flush the strainer with clean water . Re-install the strainer element , grease the Sealringand the thread with e.g. silicone oil or teflon based spray , ( see drwg 4 ) and reinstall the lid

Mode：
SF-SWF001

Output Size:
D1:25.4mm(1")
D2:31.8mm(1-1/4")
D3:38.1mm(1-1/2")

Recommended Hose Size:
D1(25mm)
D2(32mm)
D3(38mm)

Recommended Input:
D1（91L/min. 24GMP US）
D2 (143L/min. 37.8GMP US)
D3 (200L/min.52.9GMP US)