Markdown Sale Art Resin Kit Dryad Sucubus 96 Mm Scale, Unassembled And Unpainted Models Toys Hobbies For Children Doctor Strange

Resin used:
Resin is a very general thumbnail material, which has many advantages over metal or plastic. We think resin is the best material for thumbnails, so we launched most of our products.
Items in this material.
However, if used in plastic or white metal models, the resin may be slightly different.
This page describes the steps that must be completed when using resin thumbnails.
Optional cleaning
He just fantasized about opening his new incredible thumbnail, but before he continued pasting
Put things together and you want to clean them up. This stage is optional, but you will get better results
Better adhesion than paint and glue. It can be cleaned because the mold used to pour the resin can be cleaned
Leave minimal oily residue on the surface of the model. More often to keep
high-quality; We use some release agents to make it easier to remove thumbnails from the mold.
The mold or release agent of the invention can repel paint and glue and has a higher surface area than that of the surface
They clean up.
Gently brush your teeth with an old toothbrush and a little warm water and "rinse"
Clean (beware of parts that are not easy to hook). Be sure to rinse
Then let it dry completely.
crooked
The resin is very fine, but sometimes the thinner part may bend slightly during transportation or storage. yes
It is easy to fix because the resin has "thermal memory", such as thermoplastic. Remember what I used to be
Molten Therefore, it is only necessary to operate under the hot water tap or use boiled water to heat and soften. Then you
It can be carefully bent to form a shape. Let it cool in cold water and pretend it’s a
Blacksmith’s fantasy and resin will be placed in any way you want.
Cleaning machine
We are trying to produce Mini without big unpleasant mold lines, flashes, ventilation grids, bubbles or
Other things that will give you a headache. But, to the best of our ability, we are not perfect
Sometimes call your hobby "your ability". Have it your own way.
Mini plastic: use some hobby nail clippers to remove any gate (also known as: those rods / FIR)
/The mold line may need to be gently scraped or sanded with a file or hobby knife.
Any flash can be removed in the same way.
Gluing machine
Cyanoacrylic super glue must be used to paste the resin. If you rough the link surface
Use sandpaper or scratch first and you’ll get a stronger connection. Another good way is to use water
Wet a part (don’t get wet!) Then apply the glue to the second part. The link will be long
hurry up. You can also use the super glue accelerator in the same way.
If you use your fingers or anything you want to remove the glue, you can use pineapple juice.
(practical and delicious) or super glue remover.
Some larger parts may need to be placed in place like metal models. In rare cases
For large joints requiring final bonding: two parts of epoxy adhesive can be used.
Your model is clean, prefabricated and assembled.
Now you can choose your model and start painting as usual. We recommend a lamp
Spray with spray primer or good spray primer.
We hope this will contribute to some key points of our resin work. We  him well
Best luck riding and drawing your thumbnails.
Happy hobby!

*The resin is good, but be careful not to breathe too much dust when grinding or drilling. yes
It can be harmful. So when you do a lot of dust outside, or wear a mask.
Therefore, we do not recommend the use of resin thumbnails by unsupervised personnel under the age of 13.
Resin miniature is not a toy. Small parts can suffocate children under 3 years old.