Signal Receiver Transmitter | Rc Transmitter Receiver | Radiolink Receiver R8fm – R12dsm

Radiolink R6DSM 2.4G 10CH DSSS FHSS Receiver

Properties:
【10 channels】: support SBUS / PWM for your racing drone.
【Stable Signal Technology】: DSSS and FHSS dual spread spectrum anti-jamming technology to make the signal more stable, so they can not be disturbed by other devices when they are outdoors.
【Super Mini Size】: The ultra-small size of 0.59 * 0.51in greatly reduces the installation space of the receiver and improves the aesthetics of the model.
【Built in Gyro】: come with the R6FG gyro integrated receiver is can keep the vehicle in a straight line while aggressive acceleration and braking, the receiver support up to 10v of servo.
【Ultra-long receipt distance】: The receiving range can be over 600 meters, and the actual control distance is the flight environment.
【Receiver Built-in Gyroscope】: Supports Radiolink AT9 / AT9S / AT10 / AT10II, the best choice for racing drones.
  Please note:
1. R6DSM rc receiver suitable for Radiolink the transmitter AT9 / AT9S / AT10 / AT10II

RadioLink AT9-R9DS R9DS 2.4GHz 9CH DSSS Receiver

Properties:
【10 channels】: support SBUS and PWM signal while using the SBUS, it can connect 10 channels.
【Double Signal Spreading Spectrum】: Radiolink R9DS 10 channels with DSSS and FHSS spectrum anti-interference technology, they do not worry about signal loss.
【Fast Answer and Mini Size】: All channels will respond within 3ms, fast and stable. Only 43 * 24 * 15mm, only need to connect a cable SBUS, quickly set and play.
【Long Distance Control】: This transmitter’s receiver can control 900m ground and 1500 air exceptional range. (Actually control range depends on the use of environment)
【You Will Get】: an advanced technology receiver and a 12-month warranty from the brand Radiolink and 24-hour friendly customer service.

Please note:
1. RD9S only work with Radiolink transmitter products: AT9S, AT9, AT10, AT10II.
2. Short push the ID set switch two times within 1 second it can change signal, while the LED is red, it shows PWM signal output, the blue / purple LED shows SBUS signal output.
3. SBUS and PWM signal output, you can use 10 channels
SBUS and PWM signal change:

Briefly press the ID SET switch twice within 1 second, the signal is changed from normal
PWM to SBUS. The red LED shows the normal PWM and blue / purple LED shows SBUS signal.

Two signal working mode:
(1) PWM signal output working mode: red LED shows PWM signal output, 9 channels Fully.
(2) SBUS signal output working mode: blue / purple LED shows SBUS signal output, 10 channels completely.
SBUS and PWM signal possible to work simultaneously with SBUS signal output working mode.
CH9 output SBUS signal, the original CH1 output CH3 and original CH2 to CH6 output CH6 to CH10 PWM signal at the same time.

R9DS receiver specifications:
Signal: SBUS, PWM
Channel: PWM 9 channels, SBUS 10 channels
Control distance: 900 m on ground, 1500 m air
Working voltage: 4.8-10V
Working current: 38-45mA (input voltage: 5V)
Size: 43 * 24 * 15mm
Weight: 11g

Package Included:
R9DS receiver x 1

RadioLink R6FG 2.4G 6CH FHSS Receiver

Specification:
1. Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
2. Size: 35*20*13mm
3.Channel: 6
4.Model: cars/boats
5.Modulation mode: GFSK
6.Spread spectrum: FHSS
7. 10 modes memory storage
8. Antenna length: 200mm
9. Control distance: more than 400 meters
10. LCD screen: 128*64 resolution, LCD back light
11. Power supply: 4.8~10.0V DC
12. RF power: <10dbm
13.Channel resolution: 4096
14. Work current: 30mA
15. Compatible with transmitters: RC6GS, RC4GS, RC4G, RC3S, T8FB

Description:
Radiolink R6FG, 2.4GHz 6 channels receiver, gyro integrated and HV servo supported. Compatible with Radiolink 6 channels handgun grip radio RC6GS, 6 channels handgun grip radio RC4GS, RC4G, RC3S and 8 channels transmitter T8FB
For more detail information you can find here

Package included:
1 X 2.4GHz 6 channels Receiver

RadioLink R6F 2.4Ghz 6CH High Quality 2018 RC Receiver

Features:
1. Suitable for 4 channels transmitter of RC6GS, RC4GS, RC4G, RC3S nd 8 channels transmitter of T8FB.
2. Supporting for high voltage servo.
3. 6 channels in total with excellent anti-interference performance and remote control distance up to 400 meters.
4. 16 channels pseudo random frequency sequence hopping.
5. 32-bit industrial-grade M0 chip ensures superior anti-sparks interference ability.
6. Suitable for RC cars, boats.

Specification:
Frequency: 2.4GHz
Channel: 6CH
Suitable RC Model: For RC Cars/Boats
Size: 3.5 * 1.8 * 1.2cm / 1.38 * 0.7 * 0.47inch
Cable Length: 19.5cm / 7.7inch
Range: 400m / 1312.3ft
Material: Plastic
Type: Receiver
Weight: 6g
Compatible transmitters: Suitable for RC6GS, RC4GS, RC4G, RC3S, T8FB

Package Included:
1 X R6F Receiver

Radiolink R12DSM 2.4G 12CH DSSS FHSS Receiver

Radiolink R12DSM 2.4G 12CH receiver, DSSS and FHSS hybrid dual spread spectrum, 2.5 gram weight, SBUS and PPM signal support, use for Radiolink transmitters AT9, AT9S, AT10 and AT10II, is the best choice for racing drone.

Description:
Brand name: Radiolink
Item number: R12DSM
Channels: 12 channels
Working voltage: 4.8-6V
Working current: 40-180mA (input voltage: 5V)
Size: 30*15 MM
Weight: 2.5g
4096 section precision, 0.5us per section, servo anti-shake rudder.
Control distance: about 1100 meters ground and 4000 meters air, actually control distance depends on the environment.

Features:
* Only 1 gram of weight.
* Radiolink R12DSM, 2.4G 12CH receiver.
* DSSS and FHSS spread spectrum working synchronousl.
* SBUS and PPM signal support, use for Radiolink transmitters AT9,AT9S,AT10 and AT10II, is the best choice for racing drone.

Two signal working mode:
Blue/purple LED, SBUS signal, 12 channels totally.
Red LED always, PPM signal, 12 channels totally.

SBUS and PPM signal change:
Short press the ID SET switch two times within 1 second, the signal is changed from SBUS to PPM. The red LED indicates the PPM and blue/purple indicates SBUS.

How to bind with transmitter:
1. Place the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R12DSM.
3. There is a black button on the R12DSM, press the binding button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on!
Radiolink R12DSM Manual, Click here

Note: If there is a sticker in the receiver, please rip it off before you use, otherwise it will affect the use of the receiver.

Package Included:
1X Radiolink R12DSM 2.4G 12CH DSSS FHSS Receiver

RadioLink R12DS 2.4GHz 12CH DSSS & FHSS Receiver

Working Mode:
1.PWM signal output working mode:red LED indicates PWM signal output, 11 channels Totally.
2.S-BUS signal output working mode: blue/purple LED indicates S-BUS signal output, 12 channels totally.
S-BUS and PWM signal working at the same time. S-BUS signal channel(3 pin of row 11) output 12 channels S-BUS signal, PWM signal channels(3 pin of row 1 to row 10) output CH3 to CH12 PWM signals, but 12 channel in total. How many PWM signal channels you can use depends on how many S-BUS signal channels you have used(e.g: you have use 4 S-BUS signal channels, then you have 8 PWM signal channels to use).
Description:

Brand Name: Radiolink
Item Name: R12DS 2.4G 12CH Dual Antenna Receiver
Channels: 12 channels,output 12 channels signal, support S-BUS and PWM signal output synchronously.
Working voltage: 4.8-10V
Working current: 38-45mA(input voltage: 5V)
Size: 50*31.5*14.5 MM
Weight: 14g
Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX.
Resolution: 4096 section precision, 0.25us per section, servo anti-shake rudder.
Control distance: about 4 kilometers air(Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations).

Note:
1.Put the transmitter and the receiver close to each other within 1 meters.
2.Turn on the transmitter, then power on the R12DS.
3.Connect CH3 of R12DS to ESC.
4.There is a black button on the R12DS, use a thin stick press the button twice in two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal LED always on!

Package Included:1X Radiolink R12DS 2.4G 12CH Dual Antenna Receiver

Radiolink R8EF 2.4G 8CH FHSS 8 Channels Receiver

Descriptions :
Radiolink R8EF 2.4G 8 Channels Receiver FHSS for Radiolink T8FB
Features:
FHSS, follows the technology of wireless spread spectrum used by T7F, makes it possible highly superior and strong multi-path anti-interference and the same band anti-interference ability.
Technical Parameters
1. Channel: 8CH
2. Operating voltage: max 10V.
3. Operating current: 19-25mA(input voltage 5V)
4. Size: 48.5*21*11mm
5. Weight: 7g
6. Section precision: 4096
7. Signal output: S-BUS, PPM and PWM
PWM signal mode: Green LED, output 8 channel PWM signal.
SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal at the same time.
How to match code with transmitter:
1.Place the transmitter and the receiver close to each other within 1 meters.
2.Turn on the transmitter, then give power to receiver.
3.Connect CH3(R8EF) to ESC.
4.There is a black button near the antenna, hold the ID SET switch of the receiver one second and release, receiver light start blinking, it will automatically find the nearest transmitter to bind, after about 8 times blinking, match code success when receiver signal LED on!
Fail safe:
When receiver can’t receive signal from transmitter within 1 second, receiver will output signal:throttle zero, other channels keep the last signal from transmitter

Package included:
1pcs R8EF Receiver

Radiolink R8FM Mini 2.4G 8 Channels 8CH Receiver

Description
Radiolink R8FM, 2.4G 8 channels receiver, 2.5 gram weight, S-BUS and PPM signal support, use for Radiolink transmitter T8FB, is the best choice for racing drone.

Two signal working mode:
Blue/purple LED, S-BUS signal , 8 channels totally.
Red LED always, PPM signal, 8 channels totally.

S-BUS and PPM signal change:
Quick press the ID SET switch two times within 1 second, the signal is changed from S-BUS to PPM.
The red LED indicates the PPM and blue/purple indicates S-BUS.

How to match code with transmitter:
1. Put the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R8FM.
3. Connect CH3 of R8FM to ESC.
4.There isa black button on the R8FM, pressthe binding button twice in two seconds and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on!

Specification:
1) Channels: 8 channels
2) Working voltage: 4.8-6V
3) Working current: 30mA(input voltage: 5V)
4) Size: 16.0*21.5*1.0MM
5) Weight: 2.5g
6) 2048 section precision, 0.5us per section, servo anti-shake rudder.
7) Control distance: about 300m ground and 600m air, actually control distance depends on the environment.

Installment of receiver antenna:
1. The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
2. Large model aircraft may of some metal part interfering signal; in this case the antennas should be placedat both sides of the model. Then the best RF signal condition is obtained at any flying attitude.
3. The antennas must be kept away from conductive materials, such as metal and carbon by at leasta halfinch.The coaxialpartofthe antennas doesnotneedtofollowtheseguidelines,butdo not bend it in a small radius.
4. Keep the antennas away from the motor, ESC, and other noise sources as much as possible.
5. Press and hold the Easy Link (ID SET) one second, now the receiver starts work.
6. After all of the above steps finished, the LED indicator will turn and keep in red.
7. The receiver can be packed by sponge or foam for shocking proof when it is installed to the model.

After all of the above steps finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection